You have no items in your shopping basket.
Edinburgh Deluxe
Product Description
Product Description
Key Features
Power
This Hot Tub requires only a standard 13 amp supply (normal household socket). RCD breaker protection is highly recommended (some newer houses have this protection built in or a simple RCD adapter can be used).
Filter
Cartridge filter that is easily accessible topside. Filtration also runs during the heating cycles- the spa's electronic thermostat starts the low speed pump and the heater to maintain the desired temperature. The hot tub's digital control has a pre-programmed electronic timer that has been set to automatically run the filtration low speed pump for 2 hours twice a day, from 8 a.m. to 10 a.m., and from 4 p.m. to 6 p.m.
Control Panel
Digital LED control. Factory preset and programmed. Select the temperature desired and the clock and forget about it. Filtration and heating cycles are all preset.
Seating
7 seated positions all with varying jets so you can take it turn to find the seat that has the jet configuration for you.
Jets
24 stainless steel trim jets in total that are designed to deliver a firm pinpoint jet stream of massaging action to specific areas of your body, such as shoulders and lower back. Move the jet nozzle to direct the flow in any direction. The amount of pressure can be adjusted by rotating the outer rim of the jet: clockwise for lower pressure and counter clockwise for higher pressure.
Lighting
Multi, colour changing LED light fitted as standard.
Construction & Technology
The Edinburgh Deluxe has a superb one-piece, mould that is constructed using a unique rotational moulding process. This ensures a spa that combines extreme strength with durability and lightness. Added to this is a matching synthetic wood cabinet surround fitted all round the spa to provide extra insulation and protection.
The spa weighs in at just 227kg which makes it a straightforward task for three to four people to move, lift or slide into place.
The Edinburgh Deluxe has aesthetically pleasing lines, rounded corners, a smooth finish with side detailing and a top of the range hydrotherapy system. Heat retention is provided by a full foam insulation to the inner cavity of the spa shell.
Shell Colours and Panelling
Edinburgh Deluxe spas are available in Arctic, Caribbean, Sahara or Granite colour shells with Grey, Redwood or Mahogany cabinet colour options plus a matching rigid thermal/safety cover.
You may also be interested in viewing more about the following product(s)
CoverMate ECO
£209.95 including UK Mainland delivery and complimentary 3 month's chlorine-free water care
Economical Cover Lifter with side mounting brackets. Requires only 10"/25cm clearance behind the spa. |
CoverMate II Understyle Cover Lifter
£206.95 including UK Mainland delivery and complimentary 3 month's chlorine-free water care
The CoverMate II is a good choice of cover lift when clearance behind the spa is not important (18"/46cm clearance is needed). The cover is stored low down but off the ground. |




The Hot Tub Showroom
