Balboa GS 510SZ spa control box including 3KW heater, PCB and optional VL700S or VL701S touch pad control panel.
2 pump and air blower control.
2" pipe connections.
Model No. 54517 = 3KW heater
this system can only run with a variety of panels from the Serial Std range such as VL701S and the VL700S touch panels other than that it has exactly the same configuration as a GS510DZ.
26.8cm x 31.1cm x 11.7cm
Blower: 1 speed
Pump 1: 2 speed (one speed with circ / circ pump, 24hr operation with 1.5 degree centigrade safety shut off)
Pump 2: 1 speed
Heater: 3KW heater with M7 technology* (15" assembly with 2" diameter)
Spa light: 10V 12W – on/off
Audio visual device power output: Available
Electrical: 240V AC, 50Hz
This pack is connected to all components via amp plugs.
The GS range of spa control systems are Balboa designed using M7 temperature & water flow sensing technology. This increases the reliability, serviceability and installation ease of the system box..
All boxes have a plastic enclosure with gasket eliminating corrosion, condensation and water intrusion. Connectors are built on to the circuit board minimizing wires and simplifying service.